Option Parts T-Work’s MP10 & MBX8 aluminium servo savers février 1, 2021 by Chris Laisser un commentaire T-Work's have introduced new aluminium servo savers intended for the use with the Kyosho Inferno MP9 and MP10 series of 1/8th Nitro and Electric buggies as well as with the Mugen Seiki MBX8 series of 1/8th Nitro and Electric buggies. Both servo saver are machined from high quality aluminium and come black hard coated for wear. The arm of the servo saver adds significant strength and durability, … [Lire plus...] à proposT-Work’s MP10 & MBX8 aluminium servo savers
Option parts Kyosho MP9/10 Big Bore shock springs mai 14, 2020 by Chris Laisser un commentaire Kyosho have introduced three new sets of Big Bore shock springs for the Inferno MP9 series and MP10. These springs are made with a smaller 1.5 diameter wire, compared to the original springs that used 1.6 wire. Available in 70mm for the front and 81mm and 85mm for the rear, the red front springs with 7.5 coils, the light purple front springs with 8 coils, the blue rear springs with 8 and 9 coils, … [Lire plus...] à proposKyosho MP9/10 Big Bore shock springs
Option parts T-Work’s MP10 & RC8B3.1 connector-style switches mai 12, 2020 by Chris Laisser un commentaire T-Work's have introduced two new connector-style switches for the Kyosho Inferno MP9 TKI3, TKI4 and MP10 as well as the Team Assoicated RC8B3.1. The switch is mounted on a carbon fibre plate and uses a jumper wire. The plate comes pre-soldered with JR-style connectors for the receiver and battery wire while the switch is made with a XT60 connector assuring a better reliability compared to the … [Lire plus...] à proposT-Work’s MP10 & RC8B3.1 connector-style switches
T-Work’s MP9/10 aluminium centre bulkhead set mars 30, 2020 by Chris Laisser un commentaire T-Work's have introduced the new aluminium centre bulkhead set for the Kyosho Inferno MP10 as well as the MP9-series. The bulkheads are machined from high-quality 7075 T6 aluminum and black anodized with bright silver chamfered edges. The aluminium construction maintains proper gear mesh for longer gear life and reduces the chance of stripped screws coming loose in a race. The set comes with two … [Lire plus...] à proposT-Work’s MP9/10 aluminium centre bulkhead set
Option parts Kyosho MP10 & MP9 12T/18T steel diff gear sets mars 18, 2020 by Chris Laisser un commentaire Kyosho have introduced two new sets of 12T/18T differential bevel gears for the Inferno MP10 and MP9. Available for the front/rear and for the center, the sets allow to change the internal differential gear ratio from 10T/20T to 12T/18T. The changing the differential effect will improved running stability on bumpy tracks. Each set comes with steel gears, hard-coated steel bevel shafts, steel cross … [Lire plus...] à proposKyosho MP10 & MP9 12T/18T steel diff gear sets
Option parts T-Work’s introduce new Hyspin ball bearing sets janvier 15, 2020 by Chris Laisser un commentaire T-Work's have introduced a six new sets of Hyspin ball bearings for popular 1/8th buggies, E-buggies and Truggies on the market. Featuring both rubber and metal shields, the Hyspin ball bearings offer good combination between reduced drag and great durability. The Hyspin ball bearings are available in set of 24-piece for the Kyosho Inferno MP9 TKI3/TKI4, MP10 and MP10T as well as a set of 22-piece … [Lire plus...] à proposT-Work’s introduce new Hyspin ball bearing sets